Fixed prices for the work mounting manufacturers ask us for most: installation films for each roof type, renders of every hook, clamp and rail, a monthly stream of posts, wind and snow load checks to EN 1991 and ASCE 7, and a planner that turns a roof into a priced parts list. Every package starts with a free review of your CAD and ends in a fixed quote.
Four years with solar mounting manufacturers, more than 150 installation videos and 1,000 product renders across every system type. The packages are sized for the systems below; a system that needs more or less gets a fixed quote instead.
Pitched roof. Tile hooks, hanger bolts, trapezoidal and standing-seam clamps, rails, splices, mid and end clamps.
Flat roof. Ballasted south and east-west systems, tilt frames, wind deflectors, membrane-friendly feet.
Ground mount. Driven piles, ground screws and concrete footings, single and double post tables.
Carports and facades. Steel and aluminium structures, integrated cable routing, facade rails.
Accessories. Earthing clips, cable clips, end caps, module optimiser brackets, snow guards.
Materials and standards. Aluminium 6005 and 6063, stainless and galvanised steel; EN 1991, EN 1999, ASCE 7 and your market's wind and snow zones.
Step-by-step films of your system going onto the roof or the ground, built from your CAD: hooks or hanger bolts, rails and splices, clamps, modules and earthing, in the order an installer works. See the animations.
€1,900$2,100per film
One mounting system on one roof or ground type, for example your tile-roof hook kit or your east-west flat-roof system.
€4,900$5,400for 3 films
One product family on three roof types, for example tile hook, trapezoidal clamp and standing-seam clamp, with the shared rails and module clamps modelled once.
from €9,500from $10,500for 6 or more films
Pitched roof, flat roof, ground mount and carport systems filmed in one consistent style, on a delivery schedule you set.
Single film in 2 to 3 weeks from approved CAD.
Components on white for the catalogue and the web shop, and systems installed on tile, sheet, flat roofs and open ground for your website, trade shows and sales decks. See the renders.
€690$760for 6 renders
One mounting system, ready for its product page and a launch post.
€1,900$2,100for 20 renders
A family of hooks, clamps, rails and accessories covered from every angle, for the catalogue and the website.
from €4,200from $4,600for 50 renders
Your mounting range rendered and laid out as spec sheets.
One system in a week, a product family in two.
New components, roof-type highlights, installation tips and project showcases, as renders and short clips for LinkedIn and your other channels, planned a month ahead. Monthly, cancel with 30 days' notice. See the posts.
€590$650per month
One post a week.
€1,190$1,300per month
Two posts a week, with short clips.
€2,200$2,400per month
Three posts a week and a clip every week.
First posts within two weeks of the content plan.
Finite element checks of your clamps, hooks, rails and complete systems under the wind and snow loads of your markets, to EN 1991-1-4 and 1991-1-3 or ASCE 7. Each report shows peak stress, deflection and safety factor, with the weak point marked and a recommended fix. Simulation prepares you for testing and certification; it does not replace them. How a simulation project runs.
€850$950per component
One clamp, hook, hanger bolt or bracket under the loads you specify.
€2,400$2,600per system
One system type under wind, snow and combined loads, connections included.
from €6,500from $7,100per product family
A product family across the wind and snow zones of your markets, with design tables installers can use.
Component check in one week, system check in two to three.
Installers and customers mark a roof or a plot, set the modules and the rows, see your rails, clamps and hooks in 3D and get the parts list and a priced proposal. You get the lead. Built around your products and part numbers, under your brand. See the configurator we built, or try the demo.
from €7,500from $8,200setup
+ €190$210 per month for hosting, updates and support
Layout, parts list and proposal for one product family, for example your pitched-roof system.
from €15,000from $16,500setup
+ €390$430 per month for hosting, updates and support
The full configurator: satellite map, your whole range, wind estimate and cutting plan.
Planner in 6 to 8 weeks, Planner Pro in 10 to 14.
STEP or native CAD of the system, a drawing with the key dimensions and a few photos, through the contact form. We sign NDAs on request. Not sure what to send? Read what files to send.
We check the files within one business day and confirm the package price, or say what would change it, before any work starts.
You see the work at agreed points, give feedback in the included revision rounds, and receive the final files.
Send the CAD anyway. Most mounting systems fit a package; when one does not, we quote a fixed price for exactly what it needs and tell you why it differs.
Yes, and it pays to. The films, renders and load checks are built from the same 3D models of your parts, so combining them saves modelling time, and the quote reflects that.
No. Every project has a fixed price and a timeline, so you know the cost before work starts. Retainers are a fixed monthly fee.
No. They tell you where a design will fail before you build the prototype, and the reports are prepared so your test lab or certifier can work from them. The physical tests still happen.
Invoices come from Sheriscape LLC in EUR or USD, whichever you prefer, payable by bank transfer or card. Prices exclude VAT and sales tax.
Yes. We sign NDAs on request. Ask for one in your message and send the files once it is signed.
Native CAD or STEP of the assembly, a drawing with the key dimensions and a few photos cover most projects. The full list is in this guide.
Send your CAD or a few lines about the project. We reply within one business day with a fixed quote.